PREMIXED EPOXY ASPHALT COLD PATCH COMPOUND
PRODUCT OVERVIEW
Epoxy asphalt cold patch compounds are pre-blended mixtures of epoxy asphalt resins and aggregates. The finished products are loose solid particles packed in bags. For repair work, the cold patch compound is mixed with a “hardener-like” mixing cement and water. The mixed patching compound is then poured into the repairing area and compressed with a paving machine to produce a smooth, solid finish. After curing, the epoxy asphalt will become a polymer concrete.
APPLICATIONS
Epoxy asphalt cold patch compounds are high quality repairing materials for potholes and other damages in concrete pavements including epoxy asphalt polymer concrete and cementitious concrete.
COOLBOND® EAC 10-6 is a high performance cold patching compound designed for repairing potholes and other damages in concrete pavements. EAC 10-6 is a fast curing compounded product ideally for instant repairs of airport runways, steel bridges pavements, freeways etc. The product is easy to apply and requires short maintenance time.
PRODUCTS
Coolbond® EAC 10-6 Product and mixture of Part A and B
APPLICATION GUIDE
1. Cleaning: Remove debris and dirt from the area to be patched. Clean surfaces thoroughly .
2. Primer Coating： Apply the epoxy asphalt primer on to the surface area to be repaired. The purpose is for water proofing and increasing its adhesion to the patching compounds.
3. Mixing： Mix thoroughly component A, the cold patching compound with curing agents.
4. Spreading and compressing： Spread the blended compound into the repair area within one hour
5. Tamping： When the material is half-cured （1 to 1.5 hour after spreading，use a compactor to compress to a solid flat surface. Allow 4 to 6 hours of curing time before open to traffic.
TECHNICAL PARAMETERS
| Product Model | Marshall Stability (KN) | Marshall Flow Value 0.10mm | DynaTic Stability （70°C Times / mm） |
| EAC 10-6 | 55.5 | 35 | 12,300 |
APPLICATION CASES
PREMIXED EPOXY ASPHALT COLD PATCH COMPOUND
PRODUCT OVERVIEW
Epoxy asphalt cold patch compounds are pre-blended mixtures of epoxy asphalt resins and aggregates. The finished products are loose solid particles packed in bags. For repair work, the cold patch compound is mixed with a “hardener-like” mixing cement and water. The mixed patching compound is then poured into the repairing area and compressed with a paving machine to produce a smooth, solid finish. After curing, the epoxy asphalt will become a polymer concrete.
APPLICATIONS
Epoxy asphalt cold patch compounds are high quality repairing materials for potholes and other damages in concrete pavements including epoxy asphalt polymer concrete and cementitious concrete.
COOLBOND® EAC 10-6 is a high performance cold patching compound designed for repairing potholes and other damages in concrete pavements. EAC 10-6 is a fast curing compounded product ideally for instant repairs of airport runways, steel bridges pavements, freeways etc. The product is easy to apply and requires short maintenance time.
PRODUCTS
Coolbond® EAC 10-6 Product and mixture of Part A and B
APPLICATION GUIDE
1. Cleaning: Remove debris and dirt from the area to be patched. Clean surfaces thoroughly .
2. Primer Coating： Apply the epoxy asphalt primer on to the surface area to be repaired. The purpose is for water proofing and increasing its adhesion to the patching compounds.
3. Mixing： Mix thoroughly component A, the cold patching compound with curing agents.
4. Spreading and compressing： Spread the blended compound into the repair area within one hour
5. Tamping： When the material is half-cured （1 to 1.5 hour after spreading，use a compactor to compress to a solid flat surface. Allow 4 to 6 hours of curing time before open to traffic.
TECHNICAL PARAMETERS
| Product Model | Marshall Stability (KN) | Marshall Flow Value 0.10mm | DynaTic Stability （70°C Times / mm） |
| EAC 10-6 | 55.5 | 35 | 12,300 |
APPLICATION CASES
Service Hotline：+61 400 545 507
Phone：+61-3-95613202
Mailbox：sales@btaaus.com，sales@gzthebond.com
